Dongguan Kaiyu Wire Cable Equipment Co., Ltd
Dongguan Hongyefu Wire Cable Equipment Plant
ADD：Humen Town, Dongguan City, Guangdong Yuan Feng Caopu Nationwide Management District Industrial Zone
Tel：+86-0769-89606313
+86-0769-89879657
Fax：+86-0769-85239850
Contact:Mss.lao(13423119458)
Mr.Huang(13669871609)
E-mail：hyf@hongyefu.com
Position：Home > Products > Product details
Main technical parameters:
1, Usage: all kinds of bare copper or tinned copper wire, copper clad steel, copper clad aluminum alloy wire, etc. bunching or concentric cutter;
2, put the line: single head passive actinomycetes
3, to the wire diameter: φ0.0.08 ~ φ0.45mm
4, stranding sectional area: 0.035 ~ 2.5mmsq
5, Take-reel: MAX DIN500
6, maximum speed stranding: 3000rpm / 6000TPM;
7, the drive motor: 7.5KWAC
8, twisted away from the range: 4.22 ~ 39.64mm (standard 28 all segments)
9, the upper and lower shaft: manual hydraulic lift.
10, cable ways: light pole screw cable, row width, row spacing can be adjusted.
11, the noise: ≤85dB (A)
12, up tension control: magnetic clutch (new) 256 automatically controlled to ensure that empty plate to the full plate of up tension consistent.
13, brake: Electromagnetic brakes, both inside and outside break, off shares automatic braking control.
14, the device center height: 750mm
15, twisted bow: After balancing test the steel twisted bow minimal vibration during high-speed rotation, and the use of ceramic porcelain eyes over the line for balance
16, bearing cooling Lubrication: through the tank with oil lubrication. More suitable for high-speed operation.
17, traction: by changing the active length of the traction wheel to change the pitch without open gears, all drive through synchronous belt drive. Chrome plated wheel traction to prolong life.
18, stranding direction: Left or right (S or Z) set free.
19, Dimension: L2500 * W1200 * 1300mm
20, Weight: about 2200KG
Homepage
Favorites
中文版